It’s a common misconception that epoxy floors are hard to maintain. In fact, cleaning the epoxy garage floor and maintaining it is pretty simple and straightforward. But that’s only true if you know the right process of cleaning epoxy floors.
But you should remember that you’ll need some tools by your side while cleaning your epoxy garage floors. For instance, you’ll require a vacuum cleaner and some cleaning solutions.
Let’s have a look at what you’ll have to do:
Routine Cleaning Epoxy Garage Floor
You should clean your epoxy garage floor every six months. Here are the steps that you must follow while cleaning your garage floor:
- Dust the garage floor using a mop
Before you start cleaning the floor, you should get rid of the excess dust by using a dust mop. Actually, you should dust your garage floor once every week to keep it clean.
- Wipe it with a damp towel
Unfortunately, the mop won’t be able to take out all of the grime and dirt away from your garage floor. That’s why you need to take an old rag or towel and dip it in hot water. And then you should rub the dirty spots on the floor using the towel.
If the epoxy floor isn’t that dirty, you can just wipe it clean using hot water. But if that’s not the case, then you’ll have to use a cleaning solution such as a mixture of detergent and water.
- Vacuum the floor
Now it’s time to take out your vacuum cleaner and vacuum the whole area. This will suck up all the loose dust and debris that’s situated on the garage floor.
- Clean the stubborn stains
Even after you’re done cleaning and vacuuming the entire floor’s surface, you’ll still notice some spots on the floor that have some stubborn stains on them.
In order to get rid of those stains, you need to make a solution of ammonia and water and pour it over the spots. Then wipe the area with a clean, soft cloth. After that, rinse the area and let it dry.
Cleaning Spills and Stains from Epoxy Garage Floors
No matter how careful you are while in the garage, spills are bound to happen. Your garage floor will likely be affected by oil spills and tire marks from time to time. Here are the steps that you have to follow in order to deal with that:
- Sweep the garage floor
Before you start dealing with the spilled area, it’s good practice to sweep the whole floor using a dust mop. This takes out the excess dust from the surface before you get the floor wet.
- Use a commercial cleaner
In order to get those nasty stains out of your epoxy garage floor, you need to first buy a commercial-grade cleaner. Check its instructions to figure out the cleaner and water and then make the cleaning solution.
Put the cleaning solution in a spray bottle and then thoroughly spray it all over the stained areas. After you’re done doing that, take a stiff-bristled brush and scrub the area clean.
After that rinse the area and let it dry for a few hours.
- Scrub the tire marks
We recommend you use a concrete degreaser in order to get rid of the tire stains out of your epoxy floor. Pour some degreaser on top of the tire marks and leave it be for some time.
After that scrub the area using a brush. And if the tire marks are too stubborn, they won’t get off after a single try. That’s why you need to repeat this process 2-3 times.
- Remove the rust
In case your epoxy garage floor has rust stains on it, you need to scrub it clean using a scrubbing pad. These sorts of pads are typically used in the kitchen to clean the dishes.
Dip the scrubbing pad in warm water and then rub the rust stains using it. And don’t use detergent or any kind of cleaning solution while doing that.
Frequently Asked Questions
What is the best way to clean an epoxy garage floor?
By far, the best method of cleaning epoxy garage floor is by using a solution of diluted ammonia. Take a gallon of warm water and then mix roughly 2-3 oz. of ammonia into it. Then use it to clean your garage floor.
Can you power wash an epoxy garage floor?
You can power wash your epoxy garage floor if you think that the floor is extremely dirty. Although it’s not necessary, you can do it if you wanted to.
How can I make my epoxy floor shine again?
Epoxy flooring shines bright when it’s new. But with time it collects dust and debris and becomes foggy. You can make it shine again by hosing pressurized hot water on the floor.
How do you clean epoxy concrete?
You can clean epoxy concrete by rinsing it using a solution of water and muriatic acid.
Can you mop epoxy floors?
Yes, you can mop epoxy garage floors. In fact, it’s recommended that you mop or brush the floors instead of cleaning them with soap water.
Can you steam mop epoxy floors?
The answer is yes. Steam mopping epoxy floors will not only make them clean but also sanitize them.
As you’re probably aware, epoxy floors are highly durable and resilient. And that’s why this type of flooring is used in warehouses, hallways, and of course in garages. But this type of flooring has to be properly cleaned and maintained.
Hopefully, our article has given you a clear idea about what you have to do while cleaning epoxy garage floor. Just follow the steps we have mentioned above and you’ll have a clean and shiny garage floor in no time!